$29.48
Ice bath water, sorted.
The complete chlorine-free Clear As Ice range, made in Australia by Lo-Chlor. Tell us your litres and every dose on this site is worked out for your bath.
Your routine, colour coded.
Full start-up and balancing guideEach colour matches the label on the bottle, so you grab the right one with cold hands.
Every week
Filtration running, 30 minutes between each product.
- Sanitiser60 ml
- Shock20 g
- Cleanser60 ml
- Minerals50 ml
- Filter CleanerSpray, 15 min, hose
Every top-up
Tap water can carry chlorine.
- Chlorine Remover13 ml
Every month
Bio-film lives in pipes and filters too.
- Bio-Cleaner250 ml
Every 3 months
Or before you fully drain.
- Pipe Cleaner250 ml
Shown for a 1000 L bath. Set your litres above to personalise. Source: Clear As Ice General Maintenance & Step by Step Guide.
Something off with the water?
Pick what you see, add your test strip readings if you have them, and the Water Doctor gives you the fix in the right order with exact amounts. Add a photo and we will check it personally.
Twelve products. One system.
Each product has one job. Together they cover the first fill, weekly care and the deep clean.
Chlorine Remover
500 ml
$30.25
Alkalinity Increaser
500 g
$17.60
pH Reducer
500 g
$21.34
Hardness Increaser
500 g
$18.04
Shock
500 g
$41.03
Cleanser
500 ml
$27.17
Minerals
500 ml
$18.48
Instant Filter Cleaner
500 ml
$38.06
Bio-Cleaner
500 ml
$36.52
Pipe Cleaner
500 ml
$49.83
De-Foamer
500 ml
$36.63
First Fill Kit
Chlorine Remover, Alkalinity Increaser, pH Reducer, Hardness Increaser and Sanitiser: the start-up steps from the guide.
Never run out
A subscription timed to your bath size. A 500 L bath uses a bottle of Sanitiser roughly every 16 weeks, so that is when the next one arrives.
Complete System
All twelve, for commercial recovery studios, gyms and people who like to be ready for anything.
Why chlorine-free?
Clear As Ice sanitises without chlorine or bromine, so there is no chlorine smell. Because the system is not compatible with chlorine, Chlorine Remover goes in every time you fill or top up with tap water.
- Made by
- Lo-Chlor, Australian owned, since 1979
- Sanitiser target
- 15 ppm
- pH target
- 7.2 to 7.6
- Between products
- 30 minutes, filter on
Quick answers
Can I use Clear As Ice with chlorine?
No. Clear As Ice uses a non-chlorine sanitiser and is not compatible with chlorine. Add Chlorine Remover at 12.5 ml per 1000 litres whenever you fill or top up with tap water.
How often do I test the water?
At least weekly, more often with heavier use. Adjust total alkalinity first, then pH, then calcium hardness, waiting 30 minutes with filtration running between each product.
What should the readings be?
pH 7.2 to 7.6 and sanitiser 15 ppm. Total alkalinity is given as 80 to 120 ppm in the Clear As Ice care guide.
Why is my ice bath foaming?
Foam usually means body fats and oils have built up. De-Foamer knocks it down (start with half a capful), but the real fix is to run Pipe Cleaner, drain and refill.
Do I need Minerals?
No, it is optional. Minerals adds magnesium, potassium and ocean trace elements to change the feel of the water. The dose is 50 ml per 1000 litres weekly.
Can Sanitiser go by express post?
Sanitiser is classed as a dangerous good for air transport, so orders containing it always travel by road express or standard road services. Everything else can fly.